How to Clean Car AC Evaporator, Follow the Steps!
Posted on August 23, 2023 by Nur Wachda Mihmidati
How to clean the car ac evaporator can be done in the following ways. In maintaining comfort and health while driving, maintenance of the air conditioning system (AC) in a car is an important step that should not be ignored. One of the important components in the AC system is the evaporator, which plays a role in cooling the air before it is blown into the cabin. However, over time, dirt, dust and moisture can collect on the surface of the evaporator, reducing cooling efficiency and threatening the air quality inside the vehicle.
In this TransTRACK article, we will detail the steps you need to take to clean your car’s air conditioning evaporator. From setting up the appliance to the final rinsing stage, we’ll guide you through the process, ensuring that each step is taken correctly for optimal results.
How the AC Evaporator Works
The evaporator in the air conditioning system (AC) is a component that plays a role in the process of cooling the air in the room. Evaporators work by utilizing the basic principle that when liquid evaporates, it will absorb heat from the surrounding environment.
In this process, the evaporator functions as the entry point for heat from indoor air into the air conditioning system. Refrigerant which undergoes a phase change from liquid to gas enables efficient heat absorption from the surrounding environment, which in turn results in cold air being blown back into the room.
It is important to keep the evaporator clean of dirt and dust, as this accumulation can reduce the efficiency of heat exchange and the overall performance of the A/C system. Regular maintenance and cleaning will help maintain optimal performance of your evaporator and air conditioning system.
How To Clean Car AC Evaporator?
How to clean a car AC evaporator is an important process to maintain air conditioning performance and air quality in the cabin. Here are more detailed steps for cleaning a car air conditioner evaporator:
1. Turn off the car engine and prepare cleaning tools
Make sure the car engine is off and parked in a safe place. Prepare all necessary tools and materials, including protective gloves, clean cloth, AC evaporator cleaning fluid, and tools that may be needed to open access.
2. Find out the location of the Car AC Evaporator
The location of the AC evaporator may vary depending on the model and make of the car. Usually, the evaporator is located inside the dashboard near the air blower area.
3. Open the Glove Box, Then Remove the AC Filter
Open the glove box drawer carefully. Some cars may have a latch or clip that must be removed first.
Once the drawer is open, look for the cabin air filter which is generally located behind the glove box drawer. Remove the filter by removing the fasteners.
4. Locate the Blower Location
The blower is the component that moves air through the evaporator. The blower is usually located near the evaporator area, and you may need to remove some panels or screws to access it.
5. Use Cleaning Liquid
Use a special AC evaporator cleaning fluid recommended by the manufacturer or mechanic. This liquid is designed to clean dirt, mold and bacteria that may stick to the surface of the evaporator.
Follow the directions on the packaging for the cleaning solution for proper dilution and use.
6. Get a New Car AC Filter
If your cabin air filter is old or dirty, consider replacing it with a new one. A clean filter will help maintain air quality in the cabin.
7. Turn on the Car Engine and AC
Start the engine and turn on the air conditioner at the highest setting with outside air circulating.
8. Spray cleaning fluid into the blower through the AC filter hole
Through the hole where the cabin air filter is usually placed, spray the cleaning fluid towards the blower and evaporator. Make sure the liquid is evenly distributed and covers all areas that need cleaning.
9. Turn off the car engine then wait for the foam to come out of the ventilation hose
Turn off the machine after spraying cleaning fluid. Wait a few moments for foam to appear from the ventilation hose around the evaporator.
10. Clean the AC Vent Hose So It Isn’t Clogged
Check the AC vent hose to make sure there is no foam or clogged debris. Clean the hose carefully if needed.
11. Restart Machine and AC for Flushing
Turn on the engine and AC again. Let the system run for a few minutes to rinse any excess cleaning fluid from the evaporator.
When finished, reinstall the cabin air filter and glove box drawer. This process helps ensure that your car’s air conditioning evaporator is clean and performing optimally. However, keep in mind that this process may vary slightly depending on your car model, and if you are unsure, it is better to seek assistance from an experienced technician or repair shop.
[display-post-read-also]
Due to the AC Evaporator Not Having Been Cleaned
Not cleaning the evaporator of a car air conditioner regularly can have several negative repercussions on the performance of the air conditioner and the quality of the air in the cabin. The following are some of the consequences that may occur if the AC evaporator is not cleaned:
Decreased Cooling Performance
Dirt, dust, and mold that accumulate on the surface of the evaporator can hinder the efficient exchange of heat between the air and the refrigerant. As a result, the cooling system will not work effectively, and the temperature in the cabin may not reach the desired level.
Increased Energy Consumption
When the AC performance decreases, the system will work harder to reach the desired temperature. This will lead to an increase in energy and fuel consumption because car engines have to work harder to produce sufficient cooling.
Poor Air Quality
A dirty evaporator can be a breeding ground for mold, bacteria and other germs. The air that passes through the evaporator will be contaminated with these microorganisms and can cause bad odors and health problems such as allergies and respiratory diseases.
Frost or Water Flowing Inside the Cabin
Dirt that accumulates on the surface of the evaporator can interfere with airflow and cause frost or water to flow inside the car cabin. This can interfere with the comfort of the driver and passengers.
System Crash
Over time, the accumulation of dirt and moisture on the surface of the evaporator can damage components such as the blower and motor. If water continues to collect and doesn’t drain properly, it can also cause corrosion of metal parts.
Higher Repair Costs
If the evaporator becomes very dirty or damaged due to uncleanness, repair or replacement costs can be very high. Over time, untreated damage can spread to other parts of the A/C system, compounding repair costs.
Therefore, it is very important to clean the AC evaporator regularly. It is recommended to clean the evaporator at least once a year or more frequently if you are frequently in dusty or humid environments. If you are not comfortable doing the cleaning yourself, you can contact a repair shop or an experienced car air conditioner for proper maintenance and cleaning.
How long does it take to clean the AC evaporator?
The time it takes to clean a car air conditioning evaporator can vary depending on several factors, such as the level of dirt present, your experience with cleaning, and the make and model of your car. In general, the process of cleaning an AC evaporator can take around 1 to 3 hours, depending on the complexity. The following factors affect cleaning duration:
Evaporator Accessibility
Some cars may have a more complex design, requiring the removal of some components or panels to access the evaporator. If access to the evaporator is difficult, the cleaning process may take longer.
Dirt Level
If the evaporator is very dirty or contaminated with mold and bacteria, the cleaning process may take more time to ensure all dirt is removed properly.
Your Experience
If you are used to doing the cleaning yourself and have done it a few times before, you may be able to complete the process more quickly. However, if it’s your first time doing cleaning, it may take you longer to understand the steps and procedures.
Equipment and Materials
Using the right tools and materials, such as recommended cleaning fluids, can also affect how quickly you can complete the cleaning.
Additional Complications
In some cases, you may encounter additional issues that require attention during the cleaning process, such as components that are damaged or need repair.
Despite these factors, cleaning the AC evaporator shouldn’t take too long. However, it is important to perform a thorough and thorough cleaning to ensure that all dirt and contaminants are removed from the surface of the evaporator. If you feel uncomfortable or unsure about carrying out the cleaning yourself, it is better to seek the assistance of an experienced technician or repair shop to ensure that the cleaning is carried out properly and efficiently.
Now, with advanced technology such as the Vehicle Maintenance System from TransTRACK, the process of cleaning a car air conditioner evaporator is easier and more structured. By integrating evaporator cleaning steps into this system, vehicle owners can easily manage and track their vehicle maintenance.
By utilizing the Vehicle Maintenance System technology from TransTRACK, you can be more organized in caring for your vehicle, including cleaning the AC evaporator. With a regular schedule, timely notifications, and accurate step-by-step guidance, you can ensure that your car’s air conditioner continues to function properly and that the air in the cabin is always fresh and clean.
Recent Post
Topic :
vehicle enginevehicle maintenance